Visit our Popular Forums

toddmurray · 04-06-2020, 07:27

20V AC version. 30 Gallons per hour.
Also, a pressure washer attachment.

Pickup in Annapolis, MA only.

$3700.00 US or best offer.

I'm selling because I'm moving back to Lake Ontario, so no more salt water sailing.

I have had this system for 14 months, and used it no more than 15 times in the Caribbean Islands.
Everything you need to make fresh water from sea water. I ran this unit off my Honda generator 2200. The unit has minor scratches on the case from lifting in and out of the locker. Works like new.

Pickup only.

115V 60Hz Electric Pressure Supply Unit

PRODUCT DESCRIPTION
115V – 60HZ ELECTRIC DESALINATOR
Ideal for use when you have a Honda 2kW generator, an in-built generator, or a quality 2kVA inverter on board.

Sturdy injection moulded polypropylene shell.
Totally enclosed fan cooled (TEFC) induction motor.
Draws 1300 watts in steady state operation.
Designed to run with minimum of a Honda 2kW generator or a quality 2kVA inverter.
Pre-filter and housing externally mounted for ease of service.
Jabsco impeller pump to lift water and provide positive pressure to the high pressure pump.
General Pump WMR series 316 stainless steel high pressure pump, the workhorse of the RO industry.
General Pump relief valve to prevent overpressurisation and allow for pressure washing.
Sturdy 5 metre draw hose fitted with one way valve so it remains primed, with detachable strainer.
Five 5 micron pleated paper pre-filter cartridges included.
1kg (2.2 lb) bag pickling solution powder included.
Couples with one of our reverse osmosis membranes.
Dimensions: Length 600mm (23.6″), Width 270mm (10.6″), Height 375mm (14.8″)
Weight: 24.5kg (54lb)

TWO 40″ REVERSE OSMOSIS MEMBRANES IN A CASE
Our highest output RO system is compatible with either the petrol (gasoline) or AC electric pressure supply units.

Two 40″ Dow Filmtec RO membranes will produce 100 to 140 litres per hour (23 to 32 gph), depending on source water temperature and salinity.
If desired, it the entire case can be permanently mounted, or internal system can be removed and installed with included rubber mounts.
All salt water plumbing is 316 stainless steel.
Quality fluid filled pressure gauge.
316 stainless steel pressure valve for long life.
Rugged polyethylene case.
5 metre (16 ft) input hose with quick fit connector for connection to pressure supply unit, won’t mark your deck.
3 metre (10 ft) food grade polyurethane fresh water delivery hose.
10 metre (33 ft) food grade polyurethane extension hose for reaching your forward water tank.
3 metre (10 ft) brine waste hose.
Dimensions: Length 1,180mm (46.5″), Width 130mm (5.1″), Height 250mm (9.8″).
Weight: 23.5kg (52lb).
This is effectively an elongated version of the 21″ Compact RO Case.