Sherwood F85/G65 raw water pump rebuild kit

[applefritter]

Still have a few of these left if anyone is interested.

[halking3]

I am interested. how do we transact?

[applefritter]

Hello Halking3,
Pretty straight forward - just pm me with your mailing address and advise if you would like the full kit (includes the drifts needed to rebuild as well as instructions) or just the parts, and if you would like me to install the bearings on the shaft (would recommend unless you have access to a hydraulic press). I will let you know the cost of shipping prior to, and if you are okay with that I will then send along the kit. Payment is easiest through PayPal if you are okay with that.
Regards,
Rob

[sv soulianis]

Originally Posted by applefritter

Still have a few of these left if anyone is interested.

I am interested. I have a Westerbeke 40 with an F85. Shipping would be to Fort Myers, FL.

[Bryan White]

I am interesting in purchasing the full kit. I have a Perkins 4.108. Please advise if you still have some kits available and how we transact. Note, I am new to the Cruiser's Forum and not real sure how to communicate the details.

Thanks.

[applefritter]

Hi Bryan,
First and foremost - welcome to cruisers forum!
Yes I do have a few kits left. If you are interested in purchasing one just send me a PM with your address - I can then figure out the shipping cost and assuming you are okay with the final price I will send one out to you. Payment would be through PayPal if that works for you.
All the best,
Rob

[lyledank]

Hoping to resurrect an old thread because I need a rebuild kit. I tried sending a PM.

[gtough]

I am interested if you still have kits. I have a westerbeke 63b that needs the water pump">raw water pump rebuilt.

Glen

[applefritter]

Yes, still have a few kits available - if you are interested shoot me a PM, but I am currently out on my boat so will not be able to send until next week.
Rob

[markskaplan]

Are kits still available?
Just put a new G65 pump on my Westebeke 63B.
I would like to rebuild the old F85 pump to have as a spare.

[Angry Primate]

Rob -

Sent you a PM....looking for one of these kits if still available.

Thanks,
Chris

[Angry Primate]

Rob -

Just sent another PM

[PSoundIslander]

Rob,
I am just south of you in Seattle area and interested in one of these kits for our sailboat that uses the Sherwood G65 on a Perkins 4-108. Let me know if you have any of these kits left.

[applefritter]

Hi PSoundIslander,
Yes, I do still have one kit left at the old price. Unfortunately after that the price will go up a little bit as the price of Stainless, particularly 316 has gone up by over 50% in last year or so. Current price for the kit is $145, there is also a $10 fee that US customs charges me to mail it from the US, and the mailing cost, via USPS to Seattle would be $11.47 - total cost $166.47. USPS says 4 days to you, but hopefully they would be a little quicker than that! Unfortunately due to the holidays the soonest I could get it in the post would be the 28th. Payment via PayPal. Please let me know if you would like the kit.
All the best, and Merry Christmas!
Rob

[PSoundIslander]

Yes, I will take it. Do you have an extra pump flange to engine gasket to put in the kit? rickiecorlett@gmail.com is where you can send the PayPal invoice.