[SOLD] Snatch Block

[JimJohnston]

A "NM" brand Part number 3850468 snatch block looks similar to a Ronstan RF6730. I've had this sitting as a spare part now for more than ten years. The sheave is about 1/2 inch wide by 1&1/2 inches (outside diameter about 1&3/4"). It appears to be very robust. Weight is 680 gms.

Asking US$125 plus shipping from Rockland On Canada.

[PUDDLE JUMPER II]

Why no photos? Is it damaged?

[JimJohnston]

Hello PJ2

getting pictures from my phone to the computer where I wrote up the ad is cumbersome, at best, to answer your question. However, if you are interested in acquiring the block, I shall happily send you some pics for your perusal.
It's not damaged, to my knowledge as it has lain idle.

And I think that if you require one, this one is suitable for your boat genoa sheets for example . It came off my Caliber 40 where I had it as a spare.

cheers
Jim

[Fortytwo]

Can you email from your phone? Email the picture to yourself. Then, check your email on your computer. Or, you could use the CruisersForum app on your phone and post the picture.

[JimJohnston]

Thanks. That's a good idea and worth following through.

[JimJohnston]

I think these are suitable photos