Free: Watermaker parts, maybe for DIY projects

[BjarneK]

I have a Sea Recovery 12 Volt Ultrawhisper 400 that is not working. I have fixed the feed pump a couple of times, gotten new electronics and now there is another problem, probably with the high pressure pump. So it has been a disappointment and I have decided to get a Spectra instead.

Since no-one is likely to want to buy a broken watermaker, I was thinking of keeping some valves and sensors and giving the rest away. So if you want some parts let me know. They include:

- Membrane housing with membrane
- Electronics panel (probably not useful unless you have the same watermaker)
- Feed pump
- Filter housings
- High pressure pump (maybe broken? but maybe fixable)
- Frame

Here is the manual:

http://www.parker.com/literature/Wat...REV06-1-13.pdf

If you for some reason want to buy the whole thing, I am also open to that possibilty.

Since I probably won't make any money on this, I am not too keen on shipping parts. So if you happen to be in the same neighborhood as me and want some parts, maybe for a DIY project, let me know in a private message.

I am in Halifax now, and our route during the fall is: Cape Cod, Long Island Sound, New York, Delaware Bay, Chesapeake Bay.

[Davidhoy]

PM sent.

[Matt Johnson]

I could use the feed pump and would be happy to buy it. If nobody buys it and you are willing to ship to Florida at anytime.

By the way, you're sailing my dream boat.... I'd even take the 44'

Matt

[Pirate007]

Hi, sent you a PM.

Cheers
John

[BjarneK]

Thanks for your replies. It looks like there is already enough interest to get rid of the water maker. If not I will post here again.