bdbcat

Dave,
I am working on the Boundary/Drawing plugin, but I now need some help getting data between the OCPN mainline and the plugin, particularly with positioning and keyboard input. I think there may need to be some extensions to the plugin api. Can you please contact me to give some help?

Thanks
Jon

Dave,

Although I have started on this, I am off tomorrow for 10 days and I also have to catch up on stuff I put on hold whilst doing the boundary code. So it may be a little while before I have something that is testable as I will only get a few hours a week to work on it. But any help/advise you can give in this process would be most welcome.

Jon

Hello Dave,

Could you please email me at 'miscalculation at gmail.com'? I was hoping to discuss an O plugin with you, but as a new member of the forum have no permissions to send a private message.

Thank you.

Hi Dave
We got the GPS Bluetooth to work but not the sending for gribs files to saildocs.
With the version 3.3.2302 something has changed compare to version3.3.2118.
With 3.3.2118 all was working OK.
Best Regards
P_Dub

Problem to connect Bluetooth GPS and also can not send to Saildocs for the weather map. Here is the log for 3.3.2302 clean installation.
Bye
Windows 64 bits Ultimate!

Dave, the zooming problem seems to be present with CM93 and CHS S-57 as well and
been so for the last 2 beta.
Regards.
Pierre

Hi Dave,

IMPORTANT :

Since several days the access to Tracker/Flyspay is not available.
tested on XP, W7 with IE and Firefox.

Try to send a message to SouthBay by the message was rejected due to HTTP error.

Is it due to the outage last week ?

Any information ?

Serge

Hi bdbcat (Dave?).
Need an example of houw to connect a switchfor the power cycle on the Amphenol connector for a Garmin HD18 and OPenCPN. Do you have a descriptionor photo, since the pins on the board are very tiny and before I start soldering I would like to see what I'm going to do :-)

Thanks for your help

Dave

got my dev environment up and running...
Looking in chart1...

if( m_NMEA0183.Parse() )
{
if( m_NMEA0183.Gga.GPSQuality > 0 )
{
if( !wxIsNaN(m_NMEA0183.Gga.Position.Latitude.Latitude ) )
{

is what I got... the change from Gll -> Gga ( which is what I think your post said )..
was already in the repository.

Going through the debug it appears that the m_NMEA0183.Parse() is failing...
It also fails for Gll but not Vtg.

So something is a little... interesting... with my stream. I will keep digging and see where I get to.

Brian

Trouble reading and updating Canadian S 57 Charts ENC. Before it was Ok.
Last version 3.3.719 using Widows 7.
Pierre