Cuttless bearing size 8.23 catalac

[Snake doctor]

Hj folks am having a nightmare finding cuttless bearing size for 8.23 catalac the shaft size is 1 inch any help would be greatly appreciated thanks paul

[Engine man]

You will need the Outside Diameter [ OD ] to order this part. You can measure the OD of the bearing, or the ID of the bore it fits into. Let me know that info, I can probably supply this part. Joe

[SailingHarmonie]

Be really careful here with your measurements... Are you SURE that is a 1" shaft and not a 25mm? Having been built in the UK, these could go either way, I suspect...

Also, when it comes to the outer diameter, do not make the assumption that all sisterships have the same size. Measure YOURS. Also, in addition to a specific outside diameter, some of the sizes come in a different lengths, so you need that too...

[Snake doctor]

Great many thanks paul

[Snake doctor]

Great many thanks

[Snake doctor]

Many thanks she is number 62 so I think she is imperial but will take your advice and get right first time paul .